1" Lightly Air Impact Wrench
Product Description

1" Lightly Air Impact Wrench

Additional files

Product Introduction
Why is our 1 inch impact gun considered the suitable one for truck, boat, structure and other industries?

There are various 1 inch air impact guns selling in the market, and most of them are well-known brands. Why could APACH’s impact tools be the best choice for the users? Five main reasons are listed below.

  1. Lightweight

    The material used in APACH’s latest 1 inch pneumatic impact wrench is aluminum which makes the tool weigh lighter than any other 1” impact guns from other brands. The lightweight feature would decrease the users’ heavy load so much.

  2. Heavy-duty impact clutch mechanisms

    Three clutch types, twin hammer, pinless, pin clutch are available. All of these clutch mechanisms could perform stable and high torque with exceptional durability.

  3. Powerful torque

    This heavy duty impact wrench could remove and dismantle lug nuts, change tires for semi-truck, boat, structure like bridges and agriculture machine. The basic torque for this series would be 2,500 ft-lb to 2,700 ft-lb depend on different clutch mechanisms. The breakaway torque could even reach 2,800 ft-lb, which means the torque of our AW200 series is more powerful than that of similar product from any other brands you could find in the market.

  4. Low vibration and air consumption – Make the working environment even safer!

    The impact tool has been actually sent to two reliable laboratories to test its vibration. Two results are 9.49m/s2 under loading situation and 0.6m/s2 under idling mode. Besides, our impact guns are designed to have low air consumption with only 6.94cfm.

  5. Some optional specification designed to fit individual needs

    According to different individual needs and using habit, it is available to change left or right handle. Moreover, bottom or top exhaust and inside or outside trigger are also optional. The tool is designed to increase more comfortable operating experience.

  • Mechanism: Twin Hammer / pinless / pinclutch optional
  • Highest durable Japanese steel anvil (standard & 6" optional)
  • Top exhaust or bottom exhaust
  • Forward & Reverse : 3 positions for each side
  • Heavy duty casting of housing
  • Inside or outside trigger available
  • Left / Right handle available
  • Available for kit set :
    (sockets: 21, 22, 24, 27, 30, 36, 38, 41mm x 90L)
  • Industry
  • Agriculture machine
  • Structure
  • Truck
  • Boat
Tool Specifications
Square DriveBolt CapacityAvg/Air Con.Air InletAir PressureHose Size I.D.Torque 5 Sec.
1” 1-3/8" 6.94 CFM 1/2" 6.2 Bar 1/2” 1800 FT-LB
  M33 196 L/Min   90 psi   2440 N.m.
Max. Torque 10 Sec.Free SpeedVibrationSound Pressure LevelOverall LengthNet Weight
2000 FT-LB 5500 RPM 5.8m/s2 96.5 Dba 490 mm 6.9 kg
2712 N.m.       19-3/8" 16.25 LB